DAIRY APPLICATION
Choose SCS for milk, whey and other low-viscosity hygienic liquids. Choose LBX for cream, curd base, ghee and dairy products where viscosity, solids or shear sensitivity change the duty.
ANSWER FIRST
Dairy transfer pumps move product between tankers, storage tanks, chillers and process equipment. Stainless steel wetted parts, cleanability, compatible connections, seals and elastomers matter because product-contact equipment must suit both the dairy liquid and its cleaning method. SCS centrifugal selection fits milk, whey and other low-viscosity liquids when the duty point matches. LBX lobe selection is the better route for cream, curd base, ghee and other viscous, high-solids or shear-sensitive products. One pump should not be specified for every dairy liquid without checking the actual duty.
PUMP-PER-LIQUID GUIDE
This table is a selection starting point. Final sizing requires the operating data for the actual product and process line.
| Dairy liquid | Typical handling concern | Recommended pump series | Reason |
|---|---|---|---|
| Milk | Low viscosity, hygienic transfer | SCS | Centrifugal transfer for a low-viscosity dairy liquid. |
| Whey | Low viscosity and cleanability | SCS | Suited to low-viscosity dairy liquid transfer. |
| Buttermilk | Thickness and solids can vary | SCS or confirm viscosity | Use SCS for low-viscosity duty; reassess thicker product. |
| Cream | Viscosity and shear sensitivity | LBX | Lobe action is better suited to viscous, delicate product. |
| Curd base | High solids and shear sensitivity | LBX | Positive displacement transfer supports thick, sensitive duty. |
| Ghee | Viscosity changes with temperature | LBX or confirm duty | Selection depends on operating temperature and viscosity. |
| Dairy water / CIP return / RO or DM water | Duty point, material and cleaning method | SCS if duty matches | Confirm wetted MOC, flow, head and cleaning conditions. |
HYGIENIC SELECTION
Review stainless steel wetted parts, internal cleanability, sanitary connection options, seal compatibility and elastomer compatibility against both product and cleaning chemistry. Avoid layouts that create contamination traps, and match the supplied pump configuration to manual cleaning or the planned CIP cycle. A sanitary label alone does not replace a materials and cleaning review.
DUTY DATA
Accurate pump selection comes from the duty details, including product behaviour at the real operating temperature.
RECOMMENDED SHUBHAM PRODUCTS
LOW-VISCOSITY ROUTE
Use for milk, whey, low-viscosity buttermilk and other low-viscosity hygienic dairy liquids when the duty point and configuration match.
Review the SCS sanitary centrifugal pump Read the centrifugal duty-point guide
VISCOUS PRODUCT ROUTE
Use for cream, curd base, ghee and dairy products that are viscous, shear-sensitive or higher in solids.
Review the LBX lobe pumpApplication guides: cream transfer and ghee transfer.
PUMP COMPARISON
| Selection point | SCS | LBX |
|---|---|---|
| Pump type | Centrifugal | Positive displacement lobe pump |
| Best-fit duty | Hygienic low-viscosity transfer | Viscous and shear-sensitive transfer |
| Dairy liquids | Milk, whey, low-viscosity buttermilk | Cream, curd base, ghee, thick dairy |
| Choose when | Shear sensitivity is low | Solids are higher or product is delicate |
AHMEDABAD SUPPORT
Shubham Industries manufactures and supports industrial and sanitary pump selections from Ahmedabad, Gujarat. For dairy pump enquiries, share your liquid, flow, head, temperature, connection standard and cleaning method for accurate selection.
For a cross-industry comparison of centrifugal and lobe technology, use the sanitary pump selection pillar.
Shubham Industries, Plot No. 8, Swagat Industrial Park-2, Kuha, Ahmedabad, Gujarat, India.FAQ
For low-viscosity milk transfer, start with the SCS sanitary centrifugal pump. Final selection still depends on flow, head, suction condition, temperature, wetted material, connection standard and cleaning method.
LBX is the better starting point for cream because it is a positive displacement lobe pump intended for viscous and shear-sensitive products. Confirm the cream viscosity at operating temperature before sizing.
Do not assume one pump fits both. SCS suits low-viscosity milk transfer, while LBX is the safer selection route for thick, high-solids or shear-sensitive curd base.
SCS is suitable for low-viscosity whey and low-viscosity buttermilk transfer. Buttermilk thickness and solids can vary, so confirm viscosity and product condition before final selection.
Choose the LBX route when the dairy product is viscous, contains higher solids, or is shear-sensitive. Typical examples are cream, curd base, ghee and other thick dairy products.
CIP compatibility is not automatic for every dairy pump. The SCS product data confirms CIP-compatible construction when the suitable seal, gasket, MOC and surface finish are selected. Confirm the cleaning liquid, temperature, cycle and connection arrangement for the supplied build.
There is no universal MOC for every dairy liquid and cleaning cycle. SCS product data lists AISI 304, 304L, 316 and 316L options; LBX data lists an AISI 316 pump head, rotors and shaft. Confirm compatibility before ordering.
A 1 HP or 2 HP milk pump should not be promised from motor power alone. The exact variant must be confirmed against the required flow, head, suction condition and electrical supply with Shubham Industries.
Share the liquid, flow, total head, viscosity, temperature, solids, shear sensitivity, suction condition, connection, cleaning method, MOC, seal and elastomer requirements.
Yes. Shubham Industries supports sanitary and industrial pump selection from Ahmedabad, Gujarat. Send the complete duty details so the team can review the appropriate SCS or LBX route.
SELECT THE RIGHT DAIRY PUMP
Send the liquid name, flow rate, head, viscosity, temperature, solids, connection type and cleaning method. These details help separate a milk transfer duty from a viscous or shear-sensitive dairy application.