Variable effluent quality
pH and solids vary by batch, so pump material and impeller route need review.
ISO 9001:2015Prompt Quote Support45,000+ Units DeliveredMade in India
WATER TREATMENT & UTILITIES
Reliable Pumps for Water and Effluent Treatment Plants
Pump selection for ETP, STP, RO, chemical dosing, sludge transfer, treated water, and utility circulation.
✓ ISO 9001:2015✓ Since 1987✓ 45,000+ Units✓ Pan-India Supply
Water treatment pump selection depends on whether the duty is raw water, treated water, chemical dosing, brine, sludge, or industrial effluent. Shubham Industries supports ETP, STP, RO, and utility projects from Ahmedabad with centrifugal, PP chemical, stainless, and slurry-capable pump routes. Selection should consider solids, pH, corrosion, head, standby requirement, and maintenance access. Final selection depends on liquid properties, temperature, viscosity, pressure, MOC, and site conditions.
QUICK ANSWER
Which pumps are used in ETP and STP plants?
ETP and STP plants may use monoblock or centrifugal pumps for raw and treated water, PP pumps for dosing chemicals, stainless pumps for compatible effluent, and solids-capable routes for sludge or slurry. For water treatment, the first review should confirm liquid chemistry, temperature, flow, head, viscosity, solids, suction condition, and material compatibility. pH, solids, polymer concentration, brine content, and duty cycle should be confirmed. Shubham Industries is based in Kuha, Ahmedabad, Gujarat, and has supplied industrial pump requirements since 1987. The team uses application details to narrow the pump type, wetted material, seal arrangement, motor sizing, and site support needs before quotation. Final selection depends on liquid properties, temperature, viscosity, pressure, MOC, and site conditions. Shubham Industries | Kuha, Ahmedabad, Gujarat | Est. 1987 | ISO 9001:2015
Shubham Industries | Kuha, Ahmedabad, Gujarat | Est. 1987 | ISO 9001:2015
INDUSTRY CHALLENGES
Common pump challenges in Water Treatment
Chemical dosing compatibility
Dosing and transfer chemicals such as hypochlorite or coagulants need compatible wetted parts.
Continuous operation
Treatment plants often need duty-standby planning to reduce downtime risk.
RECOMMENDED SERIES
Recommended Pump Series
UTILITY TRANSFER
CMB Series
Centrifugal Monoblock
Robust monoblock pump route for water-like transfer, utility circulation, and plant services.
Flow Rate
Up to 40 LPS
Max Head
Up to 90 m
MOC
Cast Iron
Power
0.5-30 HP
WaterCooling waterNeutral effluentUtility fluids
View Full Specs →ACID & ALKALI SERVICE
CPP Series
Polypropylene Centrifugal
PP centrifugal pump route for corrosive acid and alkali transfer at compatible temperatures.
Flow Rate
Up to 162 LPM
Max Head
Up to 32 m
MOC
PP
Max Temp
70 C
HClH2SO4NaOHNaOCl
View Full Specs →SS PROCESS DUTY
SCC Series
SS316 Centrifugal
Stainless steel centrifugal pump route for process, utility, and higher-temperature duties.
Flow Rate
Up to 1890 LPM
Max Head
Up to 76 m
MOC
SS304 / SS316
Max Temp
120 C
Process waterSolventsAlkalisUtility fluids
View Full Specs →ABRASIVE SLURRY
RLC Series
Rubber Lined Chemical
Rubber-lined pump route for abrasive slurry and corrosive slurry review.
Flow Rate
Duty review
Max Head
Duty review
MOC
Rubber lined
Use
Abrasive duty
SlurryEffluentAbrasivesMineral mix
View Full Specs →APPLICATIONS
Water Treatment applications we support
APPLICATION
ETP and STP transfer
Effluent transfer needs pH, solids, and corrosion review.
- Raw effluent transfer
- Treated water discharge
- Duty-standby planning
APPLICATION
RO and chemical dosing systems
RO and dosing duties need clean duty-point and chemical compatibility checks.
- Coagulant and hypochlorite transfer
- Filter feed and backwash
- Brine and permeate handling
QUICK ANSWER
How should a water treatment pump be selected?
Selection starts with flow, head, liquid type, solids, pH, chemical concentration, operating hours, and standby philosophy. For water treatment, the first review should confirm liquid chemistry, temperature, flow, head, viscosity, solids, suction condition, and material compatibility. A treatment plant may need different pump types for intake, transfer, dosing, recirculation, filter feed, sludge, and final discharge. Shubham Industries is based in Kuha, Ahmedabad, Gujarat, and has supplied industrial pump requirements since 1987. The team uses application details to narrow the pump type, wetted material, seal arrangement, motor sizing, and site support needs before quotation. Final selection depends on liquid properties, temperature, viscosity, pressure, MOC, and site conditions. Shubham Industries | Kuha, Ahmedabad, Gujarat | Est. 1987 | ISO 9001:2015
Shubham Industries | Kuha, Ahmedabad, Gujarat | Est. 1987 | ISO 9001:2015
WHY SHUBHAM
Why Shubham for Water Treatment
Application-led selection
Recommendations start with liquid, duty point, site condition, and compatibility instead of a generic product push.
Ahmedabad engineering support
Engineers review pump, MOC, seal, motor, and package requirements from Kuha, Ahmedabad.
Test certificate focus
Pump supply is aligned with documented hydrostatic test checks where applicable before dispatch.
Custom package review
Motor, baseplate, coupling guard, trolley, skid, and special MOC requirements can be reviewed.
LIQUIDS HANDLED
Common liquids and duties
Raw WaterIndustrial EffluentSewage SludgeBrineDM WaterCooling WaterCoagulant SolutionPolymer FlocculantSodium HypochloriteAlum Solution
FAQ
Water Treatment pump questions
ETP and STP plants use multiple pump routes for intake, dosing, transfer, sludge, and treated water duties. Final selection depends on liquid properties, temperature, viscosity, pressure, MOC, and site conditions. Shubham Industries reviews duty details from Ahmedabad before recommending a suitable pump route.
Share the liquid name, flow rate, head or pressure, temperature, viscosity, solids, preferred MOC, installation type, and whether the pump is required with motor, baseplate, coupling guard, or controls.
Yes. Non-standard duty points, special MOC, seal arrangements, motor selection, skid requirements, and site-fit constraints can be reviewed by the engineering team in Kuha, Ahmedabad.
MOC is selected from the liquid chemistry, concentration, temperature, chloride content, abrasion, hygiene requirement, and compatibility with seals and elastomers. Water treatment duties may require cast iron, PP, SS316, or rubber-lined construction depending on pH, solids, and chemicals.
Shubham Industries includes hydrostatic test documentation with pump dispatch where applicable. Additional documentation can be discussed for regulated, OEM, or project supply requirements.
Yes. Shubham Industries supports pump enquiries from Ahmedabad, Gujarat, and industrial locations across India through engineering review, quotation, and dispatch coordination.
Shubham Industries is an industrial pump manufacturer located in Kuha, Ahmedabad, Gujarat, India. Established in 1987, the ISO 9001:2015 certified company has delivered over 45,000 pumping units across the Indian subcontinent. Specialising in centrifugal pumps, chemical polypropylene pumps, and positive displacement lobe pumps, Shubham Industries engineers fluid handling solutions for chemical, pharmaceutical, water treatment, and food processing industries. Every pump is dispatched with a hydrostatic test certificate from the Ahmedabad facility.
+91 83208 12638 | info@shubhampump.com | www.shubhampump.com
GET EXPERT HELP
Need help selecting the right pump?
Our engineers will review your requirement and respond with pump selection guidance from Ahmedabad.