High viscosity
Resins and finished paints may need positive displacement transfer and motor load review.
ISO 9001:2015Prompt Quote Support45,000+ Units DeliveredMade in India
PAINT & COATINGS INDUSTRY
Gear Pumps and Process Pumps for Paint Manufacturing
Pump selection for resins, solvents, pigment slurries, emulsions, finished paint, and washdown chemicals.
✓ ISO 9001:2015✓ Since 1987✓ 45,000+ Units✓ Pan-India Supply
Paint and coatings pump selection depends on viscosity, solvent compatibility, pigment loading, shear sensitivity, and cleaning method. Shubham Industries supports paint manufacturers from Ahmedabad with gear, stainless, and chemical pump routes for resins, emulsions, varnish, solvents, washdown chemicals, and finished paint. Pump speed, seal material, MOC, and motor load should be confirmed before supply. Final selection depends on liquid properties, temperature, viscosity, pressure, MOC, and site conditions.
QUICK ANSWER
Which pump is used for high-viscosity paint and resin?
External gear pumps are commonly reviewed for viscous resin, varnish, and finished paint transfer, while centrifugal or chemical pumps may suit low-viscosity solvent and washdown duties. For paint and coatings, the first review should confirm liquid chemistry, temperature, flow, head, viscosity, solids, suction condition, and material compatibility. Viscosity at operating temperature, solids, abrasiveness, and solvent compatibility must be checked. Shubham Industries is based in Kuha, Ahmedabad, Gujarat, and has supplied industrial pump requirements since 1987. The team uses application details to narrow the pump type, wetted material, seal arrangement, motor sizing, and site support needs before quotation. Final selection depends on liquid properties, temperature, viscosity, pressure, MOC, and site conditions. Shubham Industries | Kuha, Ahmedabad, Gujarat | Est. 1987 | ISO 9001:2015
Shubham Industries | Kuha, Ahmedabad, Gujarat | Est. 1987 | ISO 9001:2015
INDUSTRY CHALLENGES
Common pump challenges in Paint & Coatings
Solvent compatibility
Toluene, xylene, and wash solvents require suitable MOC, seals, and elastomers.
Pigment abrasion
Pigment-filled liquids can wear unsuitable pump internals and seals.
RECOMMENDED SERIES
Recommended Pump Series
VISCOUS TRANSFER
EGX Series
External Gear Pump
Positive displacement gear pump route for oils, resins, syrups, and viscous intermediates.
Flow Rate
Up to 500 LPM
Pressure
Up to 10 kg/cm2
MOC
CI / SS316
Viscosity
Application review
OilResinsMolassesPolymers
View Full Specs →SS PROCESS DUTY
SCC Series
SS316 Centrifugal
Stainless steel centrifugal pump route for process, utility, and higher-temperature duties.
Flow Rate
Up to 1890 LPM
Max Head
Up to 76 m
MOC
SS304 / SS316
Max Temp
120 C
Process waterSolventsAlkalisUtility fluids
View Full Specs →ACID & ALKALI SERVICE
CPP Series
Polypropylene Centrifugal
PP centrifugal pump route for corrosive acid and alkali transfer at compatible temperatures.
Flow Rate
Up to 162 LPM
Max Head
Up to 32 m
MOC
PP
Max Temp
70 C
HClH2SO4NaOHNaOCl
View Full Specs →APPLICATIONS
Paint & Coatings applications we support
APPLICATION
Resin and finished paint transfer
Viscous resin and paint transfer needs gear pump and motor review.
- Alkyd and epoxy resin transfer
- Finished paint movement
- Viscosity and suction review
APPLICATION
Solvents and washdown chemicals
Low-viscosity solvent duties need MOC and seal compatibility confirmation.
- Solvent transfer
- Equipment washdown
- Chemical compatibility review
QUICK ANSWER
How does viscosity affect paint pump selection?
Higher viscosity increases torque demand and reduces suitability of standard centrifugal pumps, so positive displacement routes are often reviewed. For paint and coatings, the first review should confirm liquid chemistry, temperature, flow, head, viscosity, solids, suction condition, and material compatibility. Motor sizing, speed, seal type, and suction condition become critical for resin and thick coating transfer. Shubham Industries is based in Kuha, Ahmedabad, Gujarat, and has supplied industrial pump requirements since 1987. The team uses application details to narrow the pump type, wetted material, seal arrangement, motor sizing, and site support needs before quotation. Final selection depends on liquid properties, temperature, viscosity, pressure, MOC, and site conditions. Shubham Industries | Kuha, Ahmedabad, Gujarat | Est. 1987 | ISO 9001:2015
Shubham Industries | Kuha, Ahmedabad, Gujarat | Est. 1987 | ISO 9001:2015
WHY SHUBHAM
Why Shubham for Paint & Coatings
Application-led selection
Recommendations start with liquid, duty point, site condition, and compatibility instead of a generic product push.
Ahmedabad engineering support
Engineers review pump, MOC, seal, motor, and package requirements from Kuha, Ahmedabad.
Test certificate focus
Pump supply is aligned with documented hydrostatic test checks where applicable before dispatch.
Custom package review
Motor, baseplate, coupling guard, trolley, skid, and special MOC requirements can be reviewed.
LIQUIDS HANDLED
Common liquids and duties
Alkyd ResinsTolueneXylenePigment SlurriesEmulsionsVarnishEpoxy ResinPolyurethaneEquipment Washdown Solvents
FAQ
Paint & Coatings pump questions
Gear pumps suit viscous paint and resin duties, while centrifugal or chemical pumps may suit lower-viscosity solvent and utility duties. Final selection depends on liquid properties, temperature, viscosity, pressure, MOC, and site conditions. Shubham Industries reviews duty details from Ahmedabad before recommending a suitable pump route.
Share the liquid name, flow rate, head or pressure, temperature, viscosity, solids, preferred MOC, installation type, and whether the pump is required with motor, baseplate, coupling guard, or controls.
Yes. Non-standard duty points, special MOC, seal arrangements, motor selection, skid requirements, and site-fit constraints can be reviewed by the engineering team in Kuha, Ahmedabad.
MOC is selected from the liquid chemistry, concentration, temperature, chloride content, abrasion, hygiene requirement, and compatibility with seals and elastomers. Paint duties may require CI, SS316, PP, compatible elastomers, and seal review depending on resin, solvent, and pigment loading.
Shubham Industries includes hydrostatic test documentation with pump dispatch where applicable. Additional documentation can be discussed for regulated, OEM, or project supply requirements.
Yes. Shubham Industries supports pump enquiries from Ahmedabad, Gujarat, and industrial locations across India through engineering review, quotation, and dispatch coordination.
Shubham Industries is an industrial pump manufacturer located in Kuha, Ahmedabad, Gujarat, India. Established in 1987, the ISO 9001:2015 certified company has delivered over 45,000 pumping units across the Indian subcontinent. Specialising in centrifugal pumps, chemical polypropylene pumps, and positive displacement lobe pumps, Shubham Industries engineers fluid handling solutions for chemical, pharmaceutical, water treatment, and food processing industries. Every pump is dispatched with a hydrostatic test certificate from the Ahmedabad facility.
+91 83208 12638 | info@shubhampump.com | www.shubhampump.com
GET EXPERT HELP
Need help selecting the right pump?
Our engineers will review your requirement and respond with pump selection guidance from Ahmedabad.