End Suction Horizontal Centrifugal Pump Manufacturer Ahmedabad
Shubham Industries manufactures SCC Series stainless steel centrifugal pumps for water, chemical, dairy, pharma-related, textile and RO/DM process transfer. From Ahmedabad, the team supports pump selection using flow rate, head, liquid, temperature, viscosity, material of construction, sealing and configuration requirements.
- Since
- 1987
- Certified
- ISO 9001:2015
- Location
- Ahmedabad, Gujarat
- Support
- Pump selection support
Selection logic
Why choose SCC for end-suction centrifugal transfer
The SCC Series stainless steel centrifugal pump is used where a buyer needs stainless steel transfer with a centrifugal hydraulic principle. It is a practical fit for clear and lower-viscosity liquids when flow rate, total head, suction condition and material compatibility are within the verified SCC range.
A centrifugal pump is normally selected for continuous transfer where the liquid can move efficiently through an impeller and casing. SCC selection is therefore based on the required duty point rather than the model name alone. Flow and head must be reviewed together with pipe size, liquid density, viscosity, temperature and suction conditions.
SCC is not the default answer for every liquid. Review LBX for viscous or shear-sensitive liquid transfer, EGX or IGX for gear-pump duties, SPM or SPX where self-priming or solids matter, and CPP where a chemical PP pump is better for corrosive media. Final duty-point confirmation is required before quotation.
Technical data
SCC Series values used for buyer shortlisting
| Parameter | SCC Series value | Buyer selection importance |
|---|---|---|
| Pump type | Stainless steel end-suction centrifugal pump | Confirms the hydraulic principle for continuous transfer of clear and lower-viscosity liquids. |
| Construction | Rolled stainless steel, not cast | Useful where stainless wetted parts, smoother surface finish and corrosion resistance are selection priorities. |
| Pipe size | 12 mm to 100 mm | Helps match the pump to line size, connection standard and expected flow rate. |
| Flow range / max flow | Up to 1890 LPM | Shortlists the SCC range before the exact model is selected from the duty point. |
| Head range / max head | 3 m to 76 m | Checks whether the pump can overcome static head, pipe friction and process back pressure. |
| Standard temperature | Up to 50 C standard | Temperature affects MOC, seal, elastomer and motor selection during quotation. |
| Viscosity limit | Up to 1500 cP | Confirms whether centrifugal transfer is suitable or whether a positive displacement pump should be reviewed. |
| Vacuum capability | Up to 720 mm Hg | Relevant for vacuum evaporator and suction-condition review where SCC data supports the duty. |
| MOC / wetted material | SS304 / SS316 / SS304L / SS316L | Material must be compatible with liquid name, pH, temperature, concentration and cleaning method. |
| Seal arrangement | Silicon Carbide standard or as per requirement | Seal choice controls leakage, compatibility, cooling and maintenance expectations. |
| Impeller option | Closed standard / semi-open on request | Impeller selection depends on clarity, solids, flow, head and application review. |
| Supply format | Monoblock / coupled pump set / bare pump | Allows selection for compact installation, replacement duty or complete pump-set supply. |
| Drive option | Monoblock / bare pump / trolley / engine driven on request | Drive and mounting depend on site power, portability, layout and maintenance preference. |
| Connection type | Tri-clove / SMS / flange / threaded | Connection must match the process line, cleaning method and installation standard. |
| Required selection inputs | Liquid, flow, head, viscosity, temperature, pH, specific gravity, solids, suction, MOC, seal, connection and quantity | Prevents undersizing, oversizing, cavitation, material mismatch and seal mismatch. |
Application mapping
Liquids commonly reviewed for SCC centrifugal pump selection
| Liquid / application | Handling concern | SCC suitability | Selection note |
|---|---|---|---|
| Water transfer | Clear liquid flow and total dynamic head | Suitable candidate within SCC duty range | Confirm flow, head, suction condition and connection. |
| RO/DM water | Clean transfer and stainless material compatibility | Suitable candidate where selected MOC is compatible | Confirm conductivity, purity expectation, seal and connection. |
| Light chemical transfer | pH, concentration, temperature and seal compatibility | Suitable only after MOC and seal review | Share exact chemical name and concentration before selection. |
| Dairy process liquid | Hygiene, viscosity, cleaning and temperature | Suitable for compatible lower-viscosity transfer | Review SCS or LBX where sanitary design or viscosity is the main concern. |
| Pharma-related utility transfer | Clean utility liquid, MOC and documentation needs | Suitable candidate after process review | Confirm liquid, cleaning method, connection and compliance expectations. |
| Textile process liquid | Dyes, pigments, pH and process temperature | Suitable only where stainless steel and seal materials are compatible | Confirm solids, dye chemistry, pH and required head. |
| Coolant / cooling tower circulation | Continuous circulation and utility duty | Suitable candidate for compatible clear liquid duty | CMB may be reviewed for general utility water where stainless MOC is not needed. |
| Food-grade low-viscosity liquid | Food contact, cleaning and low shear needs | Suitable candidate where SCC MOC and cleaning method fit | Review SCS for sanitary centrifugal requirements and LBX for viscous products. |
| Clear process liquid | Continuous transfer without heavy solids | Suitable candidate within verified flow and head range | Confirm NPSH, suction condition, liquid density and seal compatibility. |
| Low-viscosity solvent | Compatibility, sealing and site safety | Only if MOC, seal and site requirements are confirmed | Hazardous area or flame-proof needs must be reviewed before quotation. |
Final pump selection depends on flow, head, liquid name, viscosity, temperature, pH, specific gravity, solids, suction condition, seal compatibility, MOC and connection requirement.
Compare pump series
SCC vs other Shubham pump options
| Comparison | SCC | Related series | Selection note |
|---|---|---|---|
| SCC vs SCSSCS sanitary centrifugal pump | Stainless steel centrifugal process transfer for compatible clear or low-viscosity liquids. | SCS is sanitary centrifugal transfer for hygienic applications where sanitary design and cleaning requirements lead the selection. | Choose SCS when sanitary construction is the priority. |
| SCC vs LBXLBX rotary lobe pump | Centrifugal transfer for lower-viscosity duties within the verified SCC range. | LBX is a rotary lobe pump for viscous and shear-sensitive liquid transfer. | Choose LBX when viscosity or product sensitivity makes centrifugal transfer unsuitable. |
| SCC vs CPPCPP chemical pump | Stainless steel wetted parts where SS304, SS316, SS304L or SS316L is compatible. | CPP is chemical transfer with PP construction for corrosive duties where stainless steel is not suitable. | Choose CPP when polymer construction is required for chemical compatibility. |
| SCC vs CMBCMB centrifugal monoblock pump | Stainless steel process, food, dairy, textile, chemical and RO/DM water transfer. | CMB is centrifugal monoblock utility transfer for clear water and neutral liquids. | Choose CMB for general utility water where stainless steel is not needed. |
| SCC vs SPM/SPXSPM self-priming mud pump | End-suction centrifugal transfer where priming and heavy solids are not the main requirement. | SPM or SPX may be reviewed where self-priming, mud, site dewatering, suction lift or solids matter. | Choose a self-priming series when priming condition controls the duty. |
Ahmedabad support
Factory-direct discussion for centrifugal pump buyers
Shubham Industries, Plot No. 8, Swagat Industrial Park-2, Kuha, Ahmedabad, Gujarat, India.
Buyers and process plants can discuss the centrifugal pump duty directly with Shubham Industries for pump sizing, application review, quotation support, service, and spares. Detailed configurations and series data remain on the SCC Series stainless steel centrifugal pump product page.
Buyer input checklist
- Liquid name
- Flow rate
- Total head
- Suction condition
- Temperature
- Viscosity
- pH
- Specific gravity
- Solids
- MOC preference
- Seal requirement
- Connection size/type
- Motor requirement
- Quantity
Next step
Share the duty point before requesting a quotation
An SCC inquiry should include the operating point as well as the pump type. Send the requirement so the selection can be reviewed against flow, head, liquid, MOC, seal, suction condition, and connection needs.
Common questions
End-suction centrifugal pump procurement questions
What is the maximum flow rate and head of the SCC centrifugal pump?
The SCC Series centrifugal pump must be selected from the verified Shubham duty range shown on the product page. Current SCC data should be used for maximum flow and head, and final model selection depends on the required flow, total head, liquid, viscosity, temperature and suction condition.
Does the SCC Series feature a back pull-out design for maintenance?
Back pull-out construction should be confirmed during quotation for the selected SCC configuration. Shubham Industries can review the required maintenance access, pump mounting, coupling arrangement and site layout before finalizing the centrifugal pump model.
What are the standard materials of construction for the SCC Series?
The SCC Series is offered with stainless steel material options such as SS304, SS316, SS304L and SS316L, depending on liquid compatibility and duty condition. Final MOC selection should be confirmed from the liquid name, pH, temperature, specific gravity and process requirement.
Can the SCC Series centrifugal pump handle fluids containing suspended solids?
The SCC Series is generally selected for clear or low-solids liquid transfer. For sludge, mud, heavy solids or non-clog applications, Shubham Industries may recommend a self-priming mud pump, slurry-suitable configuration, or another pump series after reviewing solids size and concentration.
When should I choose SCC instead of LBX?
Choose SCC when the duty is a compatible lower-viscosity stainless steel centrifugal transfer. Review LBX when the liquid is viscous, paste-like or shear-sensitive and needs positive displacement transfer.
What data is required for SCC pump selection?
Share liquid name, flow rate, total head, suction condition, temperature, viscosity, pH, specific gravity, solids, MOC preference, seal requirement, connection type, motor requirement and quantity.
Is SCC suitable for RO/DM water transfer?
SCC is listed for RO/DM water and pure water transfer in Shubham data. Final selection should still confirm flow, head, water quality, MOC, seal, connection and suction condition.
Can Shubham Industries support centrifugal pump selection from Ahmedabad?
Yes. Shubham Industries can review centrifugal pump selection from Ahmedabad using the required duty point, liquid details, MOC, seal, connection, motor and installation inputs.